Laundry Room Plumbing Remodel
Laundry room plumbing remodel work covers the washer standpipe and drain, hot and cold supplies with accessible shutoffs, and any utility sink or floor drain you are adding. FlowFast Plumbing connects you with an independent local plumber who sizes the drain for modern washer discharge rates, vents it correctly, and roughs everything in before finishes.
- Connected with an independent local pro — never a call center queue.
- Part of our Bathroom & Kitchen Remodel Plumbing services — explained up front.
Parent service
Bathroom & Kitchen Remodel PlumbingRemodeling a bathroom or kitchen? Rough-in, fixture moves, and code requirements — get connected with an independent local plumber.
View all Remodel Plumbing servicesModern washing machines pump water out far faster than older models, and the old standpipe in many laundry rooms cannot keep up — the result is water overflowing onto the floor mid-cycle. A laundry remodel is the moment to fix that: upsizing the standpipe and drain, setting the correct height, adding a proper trap and vent, and installing supply valves you can actually reach. Many remodels also add a utility sink, which needs its own drain tie-in, or a floor drain as insurance under the washer.
Through FlowFast Plumbing, an independent local plumber plans the laundry wall around your machines: a washer box with hot, cold, and drain connections at the right heights, a standpipe sized for your washer's discharge rate, and a vent that keeps the trap from siphoning. The pro adds accessible quarter-turn shutoff valves you can reach without crawling behind the machines, and roughs in utility sink or floor drain before flooring goes down. After finishes, the pro connects the supply hoses, sets the drain hose depth, and runs a cycle to prove the drain keeps up.
Warning signs
Signs you need this service
- Your washer overflows the standpipe during the drain cycle, which usually means the drain is undersized or partially restricted for the machine's flow.
- The remodel moves the laundry to a new room, the garage, or an upstairs location that needs brand-new supply, drain, and vent runs.
- You are adding a utility sink, a floor drain, or a laundry pedestal setup that the current rough-in was never designed to serve.
- The existing supply valves are corroded, buried behind the machines, or the old rubber hoses are due for replacement with braided steel.
What to expect
The process, step by step
Planning: the pro lays out the washer box, standpipe, supplies, and any sink or floor drain from your room plan and machine specs.
Rough-in: the standpipe, trap, vent, and supply lines are run and pressure-tested before walls and flooring are fully finished up.
Valve upgrade: accessible quarter-turn shutoffs replace old gate valves or buried connections so the washer water is easy to control.
Hookup and test: the pro connects braided supply hoses, sets the drain hose depth, and runs a full cycle to verify drainage keeps up.
Prevention
How to avoid this problem
- Turn the washer supply valves off when you travel — a burst hose with nobody home causes catastrophic flooding.
- Replace rubber washer hoses with braided stainless steel, and replace those on a schedule before they age out.
- Clean the washer's drain pump filter regularly so lint and debris never restrict the standpipe downstream of the machine.
Frequently asked questions
More Remodel Plumbing services
Other bathroom & kitchen remodel plumbing jobs homeowners ask about.
Plumbing problem? Don't wait on it.
Tell us what's happening and we'll connect you with an independent local plumber who fits the job.